Indoor Heat Stress Safety Manual Program

Table of Contents

  1. Objective
  2. Policy
  3. Authority
  4. Responsibilities
  5. Heat stress prevention program
  6. Office, laboratory, and jobsites
  7. Other environments and job tasks
  8. Workplace surveillance
  9. Health disorders
  10. Working information and training
  11. Control of heat stress
  12. Engineering controls
  13. Acclimatization
  14. Work/rest cycles
  15. Personal protective equipment
  16. Fluid intake
  17. Training
 

Arc Welding Arc welding involves the use of a powerful electric arc to make and repair plain, coated, or treated metal items. Welders can be stationary, electric powered or portable, diesel/gas powered. Install electric-powered arc welders to code. Ground equipment and place it on an independent circuit with the correct-sized fuse or circuit breaker. Overloading circuits or improper installation can lead to fire, a ground fault, or equipment failure. Mount a safety disconnect switch near the user work area. Operate diesel/gas powered arc welders in well-ventilated areas to control combustion fumes. Do not add fuel to the engine while it...

Job Safety Analysis Safety Manual Program

Table of Contents

  1. General
  2. Responsibilities
  3. Documents
  4. A safe operating procedure consists of:
  5. Jsa process
  6. Select the job to be analyzed:
  7. Conducting the job safety analysis
  8. Breaking down the job
  9. Identify hazards
  10. Recommending safe procedures and protection
  11. Revising the job safety analysis

Aerial Platform Safety Jobsites are not always at ground level. Sometimes, workers need to use aerial platforms, aerial ladders, articulating boom platforms, vertical towers, or ladder trucks to reach their work. All work has hazards and risks involved in it, but when you work at an elevated height, extra training and attention to safety procedures is a necessity. In order to work safely with aerial platforms, get training on the operating procedures for your job site and task. Get specialized training on each aerial lift model you will use. Know the risks and hazards involved with aerial work, including your...

Workplace Visitors Safety Manual Program

Table of Contents

  1. General requirements
  2. Definitions
  3. Responsibility for policy and procedures
  4. Method/practice
  5. Personal protective equipment (ppe)
  6. Sample visitors policy
  7. Sample points to cover

Working Near Water Safety Manual Program

Table of Contents

  1. Purpose
  2. Scope
  3. Procedure
  4. Slips, trips and falls
  5. Machinery and equipment hazards
  6. Hoists, cranes and derricks
  7. Fire hazards
  8. Training

Slips, Trips and Falls Safety Manual Program

Table of Contents

  1. Higher risk areas
  2. Inspections
  3. Hazard control measures
  4.  Slip-resistant footwear
  5. Floor maintenance procedures
  6. Training
  7. General housekeeping / safe work practices
  8. Floor maintenance procedures
  9. Recordkeeping
  10. Slip, trip and fall hazards –checklist
  11. Others
  12. Building perimeter / stairways/special areas
  13. Design guidlines
  14. Handrails
  15. Stairways
  16. Ramps
  17. Loading dock
  18. Lighting

Rigging and Material Handling Safety Manual Program

Table of Contents

  1. Purpose
  2. Scope
  3. Key responsibilities
  4. Procedure
  5. Rigging tools and devices
  6. Jacks
  7. Jacks – inspection
  8. Blocking and cribbing
  9. Rollers
  10. Inclined planes
  11. Lever-operated hoists or come-alongs
  12. Chain hoists
  13. Chain hoist – safety precautions
  14. Grip action hoists or tirfors
  15. Electric wire rope hoists, electric chain hoists, pendant cranes
  16. Winches
  17. Anchorage points
  18. Load on structure
  19. Beams
  20. Beam clamps
  21. Slings
  22. Welded lugs
  23. Training and education

Hand and Power Tools Safety Manual Program

Table of Contents

  1. Hand and portable power tools
  2. Policy
  3. Authority and responsibility
  4. General safety precautions
  5. Hand tools
  6. Power tools
  7. Guards
  8. Safety switches
  9. Electric tools
  10. Powered abrasive wheel tools
  11. Pneumatic tools
  12. Powder-actuated tools
  13. Hydraulic power tools
  14. Ergonomics
  15. Hand and portable tool information sheet
  16. Personal protective equipment