SAME DAY TURNAROUND! 

844.674.2411      E-mail: info@safetymanualosha.com
0
  • No products in the cart.
Total:$0.00

02 Mar

Posted at 08:24h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Trenches Supervisors must inspect an excavation site, adjacent areas and protective systems every day Notify sub-contractors and visitors of the trench location Ensure all vehicles are kept a safe distance Reposition ladders frequently to keep them 25 feet away from workers in the trench Supervisors must remove workers from the excavation when water accumulates in the trench or there is evidence of other protective system problems Review and keep apprised of other hazards such as falls or accumulation of gases Do not enter an unprotected trench Inspect a protected trench before entering Immediately exit and report any problems Do not...

02 Mar

Posted at 08:20h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Drive Safely Drive Safely - Motor vehicle accidents are one of the leading causes of deaths in the U.S., according to the Centers for Disease Control. However, proper driver education, seatbelts, following speed laws, obeying the rules of the road, and paying attention to the road and fellow drivers can help reduce the risk of being injured or killed in a motor vehicle accident. The California Highway Patrol reports the most frequent accident causes on California roads include unsafe speed, unsafe following, improper turns, and inattention to the road. Following posted speed limits on roads and highways and reducing excessive speed improves...

01 Mar

Posted at 12:53h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Trenching and Shoring Construction trenching for buried utilities, pipelines, water transport, and other activities may be hazardous. Trenches are usually deeper than they are wide and the walls may become unstable and collapse on top of workers. Trench cave-ins occur when dirt, sand, and rocks collapse into the trench. These materials can engulf, injure, or kill workers in the trench. Soil can be very dense and heavy. When it engulfs workers, it can break bones, immobilize and restrict breathing, or suffocate them outright. First, get training in trenching and shoring procedures. If workers will be entering a trench 5 feet or deeper, you...

28 Feb

Posted at 12:10h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Compressed Gases Most of us know what the various compressed gas cylinders are used for on the job, but how many of us realize that the gases stored in those cylinders are under pressure of from 250 psi to 2200 psi? These pressures make the cylinders not only dangerous from a fire standpoint but if not handled and stored properly, you are looking at a bomb or a rocket. Today we want to talk about the safe use of compressed gas cylinders. Guide for Discussion Always store compressed gas cylinders in a secure upright position. Always store with caps over the valves. ...

28 Feb

Posted at 12:04h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Vehicle Backing The California Highway Patrol (CHP) reports the most common type of vehicle accident is a backing accident.  Due to limited vision out of the back windows or around long truck beds and equipment bodies, drivers may not see other vehicles, obstacles, or even coworkers and pedestrians when they are driving their vehicles backward.  Whether in a parking lot, on the road, a construction site, or an agricultural field, workers who learn the proper techniques can help prevent backing accidents. Before you back your vehicle, do a vehicle walk around to check underneath and all around it for obstructions and other...

27 Feb

Posted at 09:58h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Guardrails One of the more common OSHA citations is for lack of or improperly erected guardrails. There are two basic types of guardrails – the perimeter guardrail (i.e., found on flat roofs, upper stories before framing walls) and floor opening guardrails. Both are constructed the same way and are designed to provide the same type of protection. Guide for Discussion The following items should be reviewed when discussing guardrails: When are they required? All open-sided floors or floor openings exposing workers to a fall of six feet or greater (Four feet – general industry). Standard Specifications The top rail should be 42” high and constructed...

27 Feb

Posted at 09:32h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

No Shortcut to Safety Everyone takes a shortcut at one time or another. You cross the street between intersections instead of using the crosswalk or jump a fence instead of using the gate. But in many cases, a shortcut can involve danger. If you have the habit of taking dangerous shortcuts, break it. At work, it can be deadly. An iron worker who tried to cross an opening by swinging on reinforcing rods, slipped and fell 20 feet onto a concrete floor. If he had taken a few moments to walk around the opening, he’d still be tying rods. If you are told...

26 Feb

Posted at 12:26h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Hoisting Safety Hoisting is used to lift and lower loads using a drum or wheel with ropes or chains wrapped around it. Hoists can be powered manually, electrically, or pneumatically. Hoists effectively move heavy and/or awkward equipment, but they require training and safe work procedures. To operate a hoist, you must be properly trained. Know the rated capacity of your hoist; it should be clearly labeled on the equipment. Read the manufacturer’s operating instructions and warnings. Get training in how to use the hoist machine and how to properly rig and safely maneuver loads. Perform regular maintenance on the hoist and lifting...

24 Feb

Posted at 10:15h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Flagger Safety on Construction Sites Flagger safety - As the weather gets nicer, there tends to be an increase in outdoor construction jobs. Many of these construction operations necessitate equipment and worker activity to take place in areas of moving traffic. How can construction site managers insure that their equipment and their workers are protected while working in these traffic areas? How do they know when a flagger should be in place? According to the Construction Safety Orders, flaggers are required at locations on a construction site where barricades and warning signs cannot control the moving traffic. In these required situations, flaggers...

23 Feb

Posted at 11:23h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Residential Wood Framing Residential wood framing exposes workers to fall hazards, power tool injuries, and other general construction hazards. Wear proper personal protective equipment for framing jobs.  Work gloves to protect your hands.  A hard hat protects your head from bumps and dropped items.  Safety glasses protect your eyes from flying debris.  Work boots with a heel and slip resistant sole prevent falls. The wood pieces used for framing can be large and heavy.  Stack job materials near the work area.  Use mechanical lifting devices or use a team to lift when you can. Don’t lift and move loads that are too heavy...