OSHA Safety Manuals | eye protection
493
archive,tag,tag-eye-protection,tag-493,qode-quick-links-1.0,ajax_fade,page_not_loaded,,qode_grid_1300,hide_top_bar_on_mobile_header,qode-content-sidebar-responsive,columns-4,qode-theme-ver-11.1,qode-theme-bridge,wpb-js-composer js-comp-ver-5.4.2,vc_responsive
 

Personal Protection Quiz Selecting Suitable Eye Protection Question 1: While using an abrasive grinder to dress some hand tools, your eyes will be sufficiently protected from flying particles if you wear a face shield. Answer: No. Face shields are not approved eye protection. They are designed to protect the facial skin from cuts and abrasions. They may be worn over approved primary eye protection for additional protection to the face. Question 2: One of your assigned job duties is to transfer a corrosive liquid chemical from one container to another. You wear safety glasses with side shields while performing this task. Are your eyes...

Eye Injury Prevention Personal Protective Equipment  One thousand eye injuries occur in American workplaces every day. These injuries are responsible for over $3,000,000.00 annually in medical, lost production and workers' compensation costs!! Why are these injuries occurring? Three out of five injuries happen because the worker was not wearing any eye protection at the time of the accident. About 40% of the injured workers were wearing some type of eye protection, but it was the wrong kind and failed to protect adequately. The leading cause in this category is the lack of side shields. Accident studies reveal flying or falling objects and sparks...

Tree Trimming Safety Tree trimming operations require climbing, pruning, and felling trees. Hand and portable power tools such as loppers, trimmers, and chainsaws make the necessary cuts. Aerial lifts and chippers bring workers to the right height and clean up the worksite. The two leading causes of tree trimmer deaths are electrocutions and falls, so extra care and training is needed for work at heights and near power lines. Energized overhead or downed power lines can cause electrocutions if you come into direct or indirect contact with them. Don’t use conductive tools, ladders, or pole trimmers where they may contact overhead power...

How to Use an Eyewash You’ve probably grown accustomed to the eyewash in your workplace.  But, if you had an eye emergency, would you really know how to use it? Train NOW. Workplaces with chemicals that cause corrosion, severe irritation or permanent tissue damage, or are toxic when absorbed, require an eyewash station. Safe work practices and personal protective equipment (PPE) including gloves, coveralls, safety glasses, goggles, and/or a face shield prevent eye injuries. If you have an eye emergency, notify a coworker right away. Have someone activate 911. Get to an eyewash station immediately.  The station should be within 10 seconds travel...

Eye Protection Seeing is Believing In just the blink of an eye, an incident can injure or even blind a worker who is not wearing proper protective eyewear. The type of eye protection-safety glasses, goggles, face shields, or helmets must meet the requirements of the Occupational Safety and Health Administration (OSHA) and the American National Standards Institute (ANSI). In hazardous workplaces, street wear eyeglasses should only be worn in conjunction with ANSI-approved additional cover protection. Eye safety requirement signs should be posted for anyone entering a work area that requires industrial-quality eye protection. Warning signs should be placed near machines, equipment, or process...