SAME DAY TURNAROUND! 

844.674.2411      E-mail: info@safetymanualosha.com
0
  • No products in the cart.
Total:$0.00

07 Apr

Posted at 09:57h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Working Around Cranes A crane is one of the most versatile and important pieces of equipment usually found on a construction job. It can be used to accomplish a lot of otherwise heavy-lifting tasks. However, it can also be one the most dangerous since it can lift heavy loads over large areas of a project. Today we will discuss some of the important safety points about working around cranes. Guide for Discussion Always be aware of the swing radius of the crane Never walk within the swing radius of the crane Never work under suspended Besides the crane boom could fail. Never...

24 Mar

Posted at 10:15h in OSHA, OSHA Safety, OSHA Training, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
4 Likes

Inspection And Use Of Slings Equipment Hazards  Each day before being used, all slings, fastenings and attachments must be inspected for damage or defects. Any damaged or defective sling must be immediately removed from service. Some general safe operating practices for slings of all types are: Slings, which are damaged or defective, shall not be used. Slings shall not be shortened with knots, bolts or other makeshift devices. Sling legs shall not be kinked. Slings shall not be loaded in excess of their rated capacities. Slings used in a basket hitch shall have the load balanced to prevent slippage. Slings shall be...

26 Feb

Posted at 12:26h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Hoisting Safety Hoisting is used to lift and lower loads using a drum or wheel with ropes or chains wrapped around it. Hoists can be powered manually, electrically, or pneumatically. Hoists effectively move heavy and/or awkward equipment, but they require training and safe work procedures. To operate a hoist, you must be properly trained. Know the rated capacity of your hoist; it should be clearly labeled on the equipment. Read the manufacturer’s operating instructions and warnings. Get training in how to use the hoist machine and how to properly rig and safely maneuver loads. Perform regular maintenance on the hoist and lifting...

31 Jul

Posted at 10:58h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Crane Safety - Avoid the Crush Not understanding crane safety means it can be done incorrectly an then can cause crushing accidents occur when the body or any part of the body is squeezed between two moving objects or caught between one moving and one stationary object. Minor crushing accidents can cost workers in many ways, in pain, disability, and the loss of a job. Major crushing accidents can even cost a life. There are some simple things workers can do to lessen their chance of experiencing crushing injuries. The first, and most important thing, is for workers to know when they are...