SAME DAY TURNAROUND! 

844.674.2411      E-mail: info@safetymanualosha.com
1
Total:$25.00

02 Sep

Posted at 11:41h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Shop Safety Checklist The following are common, important safety guidelines to remember when working in the shop environmen. Follow this shop safety checklist: Under no circumstances should unapproved people be allowed to use the shop equipment. Do not allow unauthorized persons to visit or loiter in the shop. Secure the shop when no one is present. It goes without saying that you should never leave a machine in operation while it is unattended. Check emergency equipment such as first aid kits, emergency lighting, fire extinguishers and eye wash stations monthly. Periodically check all hand tools, portable power tools and larger shop...

01 Sep

Posted at 21:20h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
5 Likes

Welding On Galvanized Metals One of the most significant health hazards in the welding process is the generation of fumes and gasses. Do you weld on galvanized metals? Zinc is the coating used on galvanized metals, and when you heat the metal, it produces vaporized metal droplets which are called fumes. This is the smoky haze which consists of fine particles of metals or silicates. When you breathe these fumes, they may work deeply into your lungs. The typical effect of breathing zinc fumes is metal fume fever. One or two hours or more after welding-without proper personal protection-you may experience severe...

30 Aug

Posted at 12:32h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Skin Protection Should be a Priority Skin protection is a necessity. The skin is the single largest organ of the body. The skin, when healthy, protects us from chemical, physical, and biological hazards. Skin weighs about 10% of our total body weight and is approximately one-eighth of an inch thick. The skin is made up of two layers, the epidermis (outer layer) and the dermis (inner layer). The outer layer of skin is only 1/250th of an inch thick and is the part of our skin that forms the protective barrier. There are many skin irritants that employees may be exposed to...

24 Aug

Posted at 10:48h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
3 Likes

Employee Responsibility What is employee responsibilty? An effective Accident Prevention Program should include the defined responsibilities for management, supervisors, and employees. Management, by law, has responsibility for the safety and health of all employees as well as providing a safe workplace. Supervisors have responsibility for providing a safe work place as well as managing the production issues. Now we need to address employee responsibilities and what those entail. Employers and supervisors should expect the employees to be responsible. This starts with getting to work on time, working safely through the day, and addressing concerns to their supervisor. Suggested Areas of Responsibility Employees are responsible...

22 Aug

Posted at 10:59h in OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Meeting Topics, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tailgate Safety Meetings, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Preventing Slips, Trips and Falls Did you know that slips, trips and falls are second only to automobile accidents in causing personal injury? On stairways alone, falls result in almost two million disabling injuries yearly. There are thousands more minor injuries caused by slips, trips, and falls each year. Most alarming of all is the fact that industrial falls cause over 1,000 deaths each year. Slips occur when there is too little friction between a person’s feet and the walking surface. Many factors can cause a slip. Ice, oil, water, cleaning fluids, and other slippery substances are probably the most obvious causes....

21 Aug

Posted at 12:51h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Safety Signs You might see over 100 of them as you ride to work. Safety Signs -- they are everywhere. How many of these do you actually notice? Probably not many. That creates a problem. Not only do signs litter the streets, they may also be all over your work place. Do you see them? Do you notice them? Do they mean something or do they just make the work place look safer to the outsider? Safety Signs are placed to warn and educate. They are not simply decoration. Safety Signs can be permanent or temporary. Signs lose their impact if they...

18 Aug

Posted at 10:39h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
2 Likes

Electrical Hazards - Anatomy Of An Accident A crew of four linemen were installing intermediate poles on an existing single phase 14.4 KV distribution line. Three of the workers were journeymen with 30 or more years of experience. The fourth was an apprentice with almost 3 years experience. The following summary describes a tragic accident: One of the journeymen and the apprentice were belted off below the neutral bracket on a newly installed pole, using hot sticks to tie off the energized conductor. Another journeymen on the ground was using a hold-down to keep the conductor in place while the wrap-lock...

15 Aug

Posted at 07:51h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Ergonomics - The Term Ergonomics Ergonomics is an important term that is currently receiving a great deal of attention from safety professionals. Federal OSHA is in the process of developing standards that would require every company to have an ergonomics program.  What is ergonomics and how could it affect you? Ergonomics is the scientific study of human work. It considers the physical and mental capabilities and limits of people as they interact with tools, equipment, work methods, tasks, and the environment. The primary goal of an ergonomics program is to reduce work-related injuries and illnesses by adapting the work to fit the...

14 Aug

Posted at 11:10h in OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Meeting Topics, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tailgate Safety Meetings, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

What To Do In Case of Fire SOUND THE ALARM: Do not underestimate any fire. Sound the fire alarm and call the local fire department immediately if a fire breaks out. Choose a safe location to make the call. It will be helpful for emergency responders to know the size and location of the fire and the general hazards in the area (such as chemicals, compressed gases etc). Follow your own company’s procedures in responding to fires. USE YOUR JUDGEMENT: When you see smoke or fire, you should use your own good judgment before you decide to extinguish the blaze. Attempt to...

11 Aug

Posted at 08:14h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

The Mighty Power Press Powerful metalworking machines, like a power press make punching a hole in sheet steel look as easy a punching holes in a sheet of paper. This equipment's bulk and power is one of the reasons that injuries from power presses are among the most common in metal working industries. Power presses come equipped with numerous safety devices such as guards, barriers, presence sensing devices, or two-hand trips-for very good reason. These machines are unforgiving. The injuries they cause are usually serious. Only ten manufacturing industries out of hundreds primarily use power presses, yet they have nearly 10% of...